Visionpro iaq installation guide

All rights reserved. Wiring Connect wires as shown below see wiring guides on following pages. All wiring must comply with local electrical codes and ordinances. You can only view or download manuals with. Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual. Buy as many as you need. View and download manuals available only for.

Register and get 5 for free. This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply,. See www. Thermostat can be mounted on 2" x 4" J box or on drywall or plaster using included wall. Zone Panel Installation Guide for wiring diagrams. Registered Trademark. US Patent No.

All rights reserved. Previous Page. Next Page. With redlink touch screen programmable thermostat 43 pages. Visionpro series touchscreen programmable thermostat 41 pages. Visionpro th series touch-screen programmable thermostat 13 pages. Read these instructions carefully. US Patent No. Your new thermostat is preprogrammed and ready to go.

See page 2 to check settings. Your new thermostat is pre-programmed and ready to go. Just set the time and day. Then check the settings below and change if needed:. Set clock. Select fan setting: Preset to Auto Select system setting: Preset to Heat Inside humidity If an outdoor sensor is installed, the outdoor temperature is shown.

Press MORE to display the humidity level. Note: To change the current week day display, see page Use this setting for improved air circulation, or for more efficient air cleaning, if you do not want the fan to run all the time. If you select On or Circ , the setting you select will remain active until you press FAN again to select Auto , and return to the fan schedule. You can program four time periods each day, with different settings for each day.

Note: Press FAN to customize fan settings for any time period see page 6. This will temporarily override the temperature setting for the current time period. The new temperature will be maintained only until the time you set.

The program schedule will resume. Inside 70 Set To Press HOLD to permanently adjust the temperature. This will turn off the program schedule.

Whatever temperature you set will be maintained 24 hours a day for the number of days you select. After this number of days have elapsed, the previously programmed schedule will resume at the time you set.

Auto Changeover: When set to Auto , the thermostat automatically selects heating or cooling depending on the indoor temperature. Compressor Protection: This feature forces the compressor to wait a few minutes before restarting, to prevent equipment damage. Flashing message: Reminder to replace filter or UV lamp. Southern Away Dehumidification: Your system may be programmed to control humidity while your house is vacant during the humid season. Before you leave the house, press the HOLD button three times to activate this feature.

This will control temperature and humidity to help protect your house and possessions while you are away. If this feature does not work, contact your installer. When the screen is fully locked, no keys function.

To lock or unlock the screen, see advanced function on page The screen will remain locked for 30 seconds so you can clean the screen without changing any settings. Note: Do not spray any liquid directly on the thermostat.